Finally Blur is available for us on the PC. In order to get it working with your logitect rumblepad 2 / dual action game pad, all you need to do is ...copy the files of x360ce vibmod 3.1.4.0 :
x360ce.ini
xinput1_3.dll
XInputTest.exe
Into the installed directory like :
\Program Files\Activision\Blur(TM)
Now, after completing "Split Second", I'm ready to take on this racer. To see if it got what it takes to make it to the top... so far it looks pretty good.
Edit: after playing it for a while, it just don't feels like this game is going to make the top list. It's not my kind of racing... I'm more into the "Split Second" kind of racing type... So do try this for a while before you buy it, so you wont be dissappointed... I'm going to give this a few more hours to see if it'll get any better down the line... But the "power-ups" make this game feel more like a "kids" game than anything else...
Posts
thanks for the tip!!
ReplyDeletefor some reason, it doesnt detect R2 and L2 in XInputTest.exe and i cant play the game properly cause it wont acclerate
ReplyDeleteany ideas?
Use x360ce vibmod 3.1.4.1 instead of 3.1.4.0 and you can use R2 and L2 buttons too. Worked for me.
ReplyDeletehttp://virusdev.ovh.org/files/xinputemu/x360ce%20vibmod%203.1.4.1.zip
thanks man! worked like a charm!
ReplyDeleteI've just played it. The graphics are significantly worse than those of Split/Second (I'm able to run Blur with full specs, unlike Split/Second). Being a long time Mario Kart fan and player, I can guarantee this game is no way as fun as Mario Kart. I actually had more fun playing Death Track Resurrection than playing Blur.
ReplyDeleteAll in all it's a decent game, but Split/Second is still the best alternative to Burnout.
Oh, btw, I also tried what T. said with my Cordless RumblePad 2 and it works like a charm! Thanks!
For me Split/Second runs smoother than Blur, strange... And your right, It's more addictive than Blur, Split/Second got that feeling of wanting to return to, and try to complete all tracks as #1. While after a few hours of Blur, it just don't give me that feeling...
ReplyDeleteI'll start using vibmod 3.1.4.1, but I think I stuck with 3.1.4.0 as it was stable enough to get the job done... I think the L2 / R2, it's just a matter of configuration in the .ini file.
not working for w7 (x64)
ReplyDeleteCan't seem to enable the force feedback? Any ideas.
ReplyDeleteWorking fine on W7 x64 Ult
I have two "Rumblepad2" wireless gamepads. But the XInputTest.exe only show me in grees as "connected" only in one of them.
ReplyDeleteController 1 .......... Status: connected
Controller 2 .......... Status: Not connected
Controller 3 .......... Status: Not connected
Controller 4 .......... Status: Not connected
The funny thing is when i touck the other gamepad the one that is working, stop working.
Is like the two gamepads are in the same "Controller 1"
sorry for my english....................help
Check the .ini file, and make sure you set the index for 2 pads.
ReplyDeleteHow? i don´t understand.
ReplyDeleteCan you edit a x360ce.ini for two gamepads and send me to my email.
Ribersound@yahoo.com.ar
please? thanks!
oooH!
ReplyDeleteI´m using x360ce vibmod 3.1.4.1.
i copied the vibmod files but when i start the game i only see the small update window. game stays completely black. btw: got W7 x86. would be appreciative for any help. the game is nice but racing with keyboard sucks as hell.
ReplyDeleteTHX!
thx.works like charm.
ReplyDeleterumble don't function with win 7 x64 and rumblepad 2... :(
ReplyDeleteI would just let you all know, that ik worked for me (rumblepad 2 with win 7 64 bit ultimate)
ReplyDeleteThanks !!!
X Makiwokki
ReplyDeleteHI! i have rumblepad 2 and win 7 x64.what file did you put in blur folder? rumble is functionally?
I know how to make 2 game pads working together finally, taking me half an hour.
ReplyDeleteStep 1:
Download x360ce vibmod 3.1.4.1
Step 2:
Please read "readme", it teaches you how to get your VIP and PID for your game-pad, especially important when using two pads.
Step 3:
x360ce.ini
xinput1_3.dll
XInputTest.exe
Copy the above to C:\Program Files\Activision\Blur(TM)
Step 4:
Open x360ce.ini with Notepad
Change the following, if my 1st gamepad got 046D VID and C219 PID; 2nd gamepad got 046D VID and C212 PID.
[PAD1]
Index=0
VID=0x046D
PID=0xC219
[PAD2]
Index=1
VID=0x046D
PID=0xC212
Left Trigger=7
Right Trigger=8
( Because by fault, Left and Right Trigger values are different at [PAD2])
Step 5:
Double click XInputTest.exe
Test every button especially and enjoy the game!
hello,
ReplyDeletei have a big problem. i have configered my ini-file for 4 logitech rumblepad 2 gamepads and they are working fine. but when i unplugg 2 of them and only want to play with 2 the game beginns to get very slow.
so when i have installed in the ini 4 gamepads and have only 2 plugged in there is a problem.
is there a way to fix this except of changing the ini-file every time i start the game? let the 4 gamepads plugged in is not a solution.
thx
Thank you so much...This is the only place I found the anwser to my gamepad problem..
ReplyDeleteHello, I tryed to adjust PID/VID but both Gamecontrollers have the same Value ( Human Interface Devices entries) how is this possible?
ReplyDeleteIs it possible to change these PID/VID's manually?
Lineage2 Lineage2 private server top 100 servers
ReplyDeleteIt works!!!
ReplyDeleteBut what fill I in by de third gamepad???
[PAD1]
Index=0
VID=0x046D
PID=0xC219
[PAD2]
Index=1
VID=0x046D
PID=0xC212
Left Trigger=7
Right Trigger=8
( Because by fault, Left and Right Trigger values are different at [PAD2])
*Guys..remind that you MUST match the number of gamepads you used with the config in x360ce.ini that you enable. Or the game will crash itself.
ReplyDeleteIndex=-1 is the way to disable it.
*If you use more than 2 gamepads, I guess you should set the Index by numeric order, say 0,1,2,3.
So your third gamepad config will be:
[PAD3]
Index=2
VID=0x046D
PID=0xC214
Left Trigger=7
Right Trigger=8
*PID/VID should be different for different gamepad since it is their unique ID. Read the instruction of how to get VID/PID of your gamepad.
server private top 100 Lineage2
ReplyDeleteyes, works for me too with cordless rumblepad 2:)
ReplyDeletethank you!
Has anyone managed to get the rumble feature working yet on W7 x64? I'm using vibmod 3.1.4.1. When I run Xinputtest the rumble works, but ingame it doesn't...
ReplyDeleteUse version 3.1.4.0. For me the force feedback didn´t work ingame as well with 3.1.4.1.
ReplyDeleteThanks anonymous :)
ReplyDeleteI got alot of ifnormation here... so basically i can use my rumplepad in career mode... but how do i play a split screen mode using keyboard and single gamepad? when i go to split screen... nothing is clickable and only one profile is there.. which is my career.. how do i play a split screen game? PLEASE HELP.
ReplyDeletehi..
ReplyDeletehave 2 identical rp2... and they have the exact same id? strange!
Thanks, it works, i can play Blur using rumplepad2 now
ReplyDeleteFlawless. Thank you!
ReplyDeleteI updated Blur and when i try to use the Xboxce Vibmod, the game doesn't start.
ReplyDeleteOops i forgot to mention I Run w7 x64.
ReplyDeletei have a problem i do everithing but when i am in game an chose split screen and prees y (my gamepad 1) nothing hapend
ReplyDeleteemail: tine1386@ovi.com
GOOd Post.helped me a lot.thanks.now I can play with 3of my friends using 1pad & the keyboard(for 2).
ReplyDeletewhere i will download the files???
ReplyDeletelink?