Sunday, January 24, 2010

Dark Void

I found that for Dark Void, you need to use the old xinput3 xbox 360 joypad emulator.

\Program Files\CAPCOM\DARK VOID\nativePC\Binaries\

dinput8.dll
xbox360cemu.ini
xinput1_3.dll
xinput9_1_0.dll
XInputTest.exe

if you haven't got em, you may download from :

http://rapidshare.com/files/249164419/xinputemu3.0.zip

This is not a to bad game, after 40 hours of avatar, it's time to move onto something new, and this seems to be it. fairly good story, a bit kid friendly (older kids). you'll enjoy it... I usually have higher expectations on capcom games. Hopefully it might get better as the game progress, now I'm only an hour into the game...

5 comments:

  1. the link did not work :(

    ReplyDelete
  2. I found this on darkvoid forum:

    Go to the following directory: Program Files (x86)/CAPCOM/Dark Void/NativePC/SkyGame/Config

    Right Click 'DefaultInput.ini' and uncheck 'Read Only'. Then Open 'DefaultInput.ini' with notepad. Scroll near the end of the file to the section: [OnFootMinBindings SkyInputLayout]

    Locate the following line:
    .Bindings=(Name='XboxTypeS_LeftY',Command='Axis aBaseY Speed=1.0 DeadZone=0.3') and change Speed=-1.0
    (this means add a '-' before '1.0'

    Restart the game, the left stick should now map correctly (up=forward walk). Because flight mode uses separate bindings, this change will not affect left Y axis flight controls.

    ReplyDelete
  3. i dont get get it i put '.' before 1.0 like '.'1.0

    ReplyDelete
  4. Add a minus before 1.0 so it becomes -1.0, not a dot.

    ReplyDelete
  5. i did it and nothing happend

    ReplyDelete